GB
21
If the timer switch on and off times are identical, the word
ERROR
is
displayed.
The timer enables you to switch the system on or off at
specific times.
Example:
You wish to wake up to music every morning.
If you no longer want the system to be switched on or off
automatically, you must cancel the timer.
Before setting the timer, check that the current time is correct.
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
Switch the system on by pressing .
Press Timer/Clock until
TIMER
is displayed.
Press Program/Set.
Result:
ON TIME
is displayed (instead of the equalizer symbols) for
a few seconds, followed by any switch-on time already set;
you can set the timer switch-on time.
Set the timer switch-on time.
a
Set the hour by pressing
and
.
b Press Program/Set.
Result: The minutes flash.
c Set the minutes by pressing
and
.
d
Press Program/Set.
Result:
OFF TIME
is displayed (instead of the equalizer symbols)
for a few seconds, followed by any switch-off time already
set; you can now set the timer switch-off time.
Set the timer switch-off time.
a
Set the hour by pressing
and
.
b
Press Program/Set.
Result: The minutes flash.
c
Set the minutes by pressing
and
.
d
Press Program/Set.
Result:
VOL 15
is displayed, where
15
corresponds to the
volume already set.
Press
and
to adjust the volume level and press Program/Set.
Result: The source to be selected is displayed.
Press
and
to select the source to be played when the
system switches on.
If you select...
You must also...
TAPE (cassette)
Insert a recorded cassette in one of
the decks before setting the
system to standby.
TUNER (radio)
a Press Program/Set.
b
Select a preset station by pressing
Tuning
and
.
CD (compact disc)
Load compact discs.
Press Program/Set to confirm the timer.
Press to set the system to standby mode.
Result:
is displayed to the bottom left of the time, indicating that
the timer has been set. The system will switch on and off
automatically at the required times.
Timer Function
7
8
9
5
6
1
2
3
4
After having set the timer, it will start automatically as shown
by the TIMER indication on the display. If you no longer wish
to use the timer, you must cancel it.
You can stop the timer at any time (system on or in standby mode).
To...
Press Timer On/Off...
Cancel the timer
Once.
Result: is no longer displayed.
Restart the timer
Twice.
Result: is displayed again.
Cancelling the Timer
Timer
On/Off
EQ/S.Bass
REV.
Mode
CD SYNC.
CD
Repeat
Program/Set
Mono/ST
Mute
Tune/CD
Mode
VOL.
Band
+10
Sleep
TAPE
Aux
Timer/
Clock
VOL.
Display
PTY
RDS
2
3,4,5,6,7,8
4,5,6,7
4,5,6,7
1,9
Timer
On/Off
EQ/S.Bass
REV.
Mode
CD SYNC.
Sleep
TAPE
Aux
Timer/
Clock
Display
PTY
RDS
