GB
10
Your system is equipped with a clock which allows you to
turn your system on and off automatically.
You should set the clock:
When you first purchase the mini-compact system
After a power failure
After unplugging the unit
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
Switch the system on by pressing
.
Press Timer/Clock twice.
Result:
CLOCK
is displayed.
Press Program/Set.
Result: The hour flashes.
To...
Press...
Increase the hours
Decrease the hours
When the correct hour is displayed, press Program/Set.
Result: The minutes flash.
To...
Press...
Increase the minutes
Decrease the minutes
When the correct time is displayed, press Program/Set.
Result: The clock starts and is displayed, even when the system is in
standby mode.
You can display the time, even when you are using another
function, by pressing
Timer/Clock
once.
The System allows you to choose your favorite color to
produce your own personal atmosphere.
Press the Color/Demo button and select the color you want.
Result: Whenever the button is pressed, the color is repeated in the
sequence of Cyan
➞
Green
➞
Red
➞
Blue
➞
Violet
➞
Y. Green
➞
White
➞
Off
➞
Auto.
If you select Auto mode, 7 colors are displayed for 3 seconds
alternatively.
Setting the Clock
2
1
1
2
3
4
5
6
7
7-Color Display Function
You can view the various functions available on your system.
Press the Color/Demo button.
Result: The various functions available are listed in turn on the
display.
All these functions are described in detail in this booklet.
For instructions on how to use them, refer to the appropriate
sections.
To cancel this function, press Color/Demo again.
2
1
Viewing the Various Functions on
Your System
S.Bass
VOL.–
VOL.+
Mode
Function
Color/Demo
S.Bass
VOL.–
VOL.+
Mode
Function
Color/Demo
Timer
On/Off
EQ/S.Bass
REV.
Mode
CD SYNC.
CD
Repeat
Program/Set
Mono/ST
Mute
Tune/CD
Mode
VOL.
Band
+10
Sleep
TAPE
Aux
Timer/
Clock
VOL.
Display
PTY
RDS
4,6
1
2
3,5,7
4,6
