6
●
Unplug the appliance before replacing or repairing electrical parts.
⇒
Be careful to avoid electric shock.
●
Always use only the correct replacement parts.
⇒
Check the model name, rating voltage, rating current, running temperature symbols.
●
When troubleshooting, verify that wiring harnesses are connected securely.
⇒
Make not to be separated when some power is imposed.
●
Check the traces of water infiltration at the electric parts.
⇒
If there is a trace of water infiltration, exchange or tape the parts.
●
Check the assemble status of parts after troubleshooting.
⇒
It must be in the same assembled state when compared with the state before disassembly.
●
Check the use circumstance of refrigerator.
⇒
If the refrigerator is installed at the place that is damp or wet, or status of installation is
unstable, change the installation place.
●
Ground the refrigerator properly
⇒
Particularly, Be sure to earth when there is a risk of an electric leakage by humidity or wetness.
●
Do not use multi plugs in a plug socket at the same time.
Check if the power cord and socket is damaged, pressed, squeezed, or fired.
⇒
If the plug or plug socket is damaged, repair or exchange it immediately.
●
Do not allow consumers to repair the appliance by themselves.
●
Do not store other materials except the foods.
⇒
Drugs or scientific materials : difficult to keep precise temperature.
⇒
The inflammables(alcohol, benzene, ether, LP gas, butane gas etc.): have risk of explosion.
1. Precautions(Safety Warnings)