13
Step-by-step installation guide
4
. Roll the blower unit 90 ° so that fan blade
openings are facing toward the front of the
microwave.
Before Roll
After Roll
5
. Place the blower unit back into the opening.
CAUTION
: Do not pull or stretch the blower unit
wiring. Make sure the wires are not pinched.
6
. Remove the metal vent fan cover on the back of
the microwave by sliding it up.
7
. Close the blower door. Slide blower shield onto
the top of the blower door opening.
8
. Secure the blower to the microwave using the
blower retaining screws from Step 1.
Back of
Microwave Oven
Blower
Retaining
Screws
Blower Retaining
Screw
B. RECIRCULATING (NON-VENTED DUCTLESS) (CONT.)
B2. INSTALLING THE CHARCOAL
FILTER
1
. Remove screws on top of grille using a #1
Phillips screwdriver.
2
. Open the door.
3
. Remove the grille.
• After push left, Pull the grille straight off.
Charcoal
Filter
4
. Install the charcoal filter. When properly installed,
the wire mesh of the filter should be visible from
the front.
5
. Reinstall the grille and the screws.
6
. Close the door.
Insert mesh-side up
Insert mesh-side up
SMH8165_XAA_DE68-03587A-10_EN.indd 13
6/19/2019 3:44:38 PM
