14 English
S
tep-b
y
-s
tep ins
tallation g
uide
Step-by-step installation guide
Plate
8EA
After removing Plates
2.
Cut 8 area to remove plates using
nipper.
The marked Brackets should not
have Vent holes.
NOTE
You must check bracket picture according
to ventilation type at page
12
.
The marked Brackets should have
Vent holes.
NOTE
•
The Exhaust Adaptor with
the Damper is not needed for
recirculating type. You may want to
save them for possible future use.
•
You must check bracket picture
according to ventilation type at page
12
.
C. Outside back exhaust (horizontal duct)
C1. Adapting the COVER PANEL for outside back exhaust
1.
Make sure the Cover Panel is
assembled properly. (Top assembly)
Install_ME11A7510DS_AA_DE68-04709A-00_EN+MES.indb 14
Install_ME11A7510DS_AA_DE68-04709A-00_EN+MES.indb 14
2021-06-16 10:55:29
2021-06-16 10:55:29
