GB
13
You can view the various functions available on your system.
Press the Demo button.
Result: The various functions available are listed in turn on the dis-
play.
All these functions are described in detail in this booklet.
For instructions on how to use them, refer to the appropriate
sections.
To cancel this function, press Demo again.
According to a DISC or TV, Press the REC/Pause button on the front
panel.
Set the system to standby(power off) mode, press the REC/Pause button
on the front panel.
Result: Each time the REC/Pause button is pressed, the following
appears in the display:
Your system is equipped with a clock which allows you to
turn your system on and off automatically. You should set
the clock:
When you purchase the mini-compact system
After a power failure
After unplugging the unit
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
Switch the system on by pressing On/Standby.
Press Timer/Clock twice.
Result:
CLOCK
is displayed.
Press Enter on the front panel.
Result: The hour flashes.
To...
Turn the Multi Jog knob to the...
Increase the hours
Right
Decrease the hours
Left
When the correct hour is displayed, press Enter on the front panel.
Result: The minutes flash.
To...
Turn the Multi Jog knob to the...
Increase the minutes
Right
Decrease the minutes
Left
When the correct time is displayed, press Enter on the front panel.
Result: The clock starts and is displayed, even when the system is
in standby mode.
You can display the time, even when you are using another
function, by pressing
Timer/Clock
once.
You can also use
/
buttons to instead
Multi Jog
knob in step 4,6.
Setting the Clock
Viewing the Various Functions on
Your System
2
1
1
2
3
4
5
6
7
NTSC/PAL Selection Method
NTSC PAL
SECAM(option)
1
2
4,6
3,5,7
MAX-Ds750 GB-1~24 5/22/03 10:44 Page 13
