ENG
53
•
The various functions available are listed in turn on the display.
•
All these functions are described in detail in this booklet.
For instructions on how to use them, refer to the appropriate sections.
DEMO Function
You can view the various functions available on your system.
DEMO Function / DIMMER Function /
ECO Function
•
Each time the button is press, the brightness changes as follows:
DEMO ON
DIMMER ON(Dim)
DIMMER OFF(Bright)
.
DIMMER Function
You can adjust the brightness of the display on the main unit so it won't
interfere with your movie viewing.
Press
DEMO/DIMMER
button.
Press
DEMO/DIMMER
button.
54
MISCELLANEOUS
Press any buttons to cancel DEMO function.
When you turn off the main unit, DEMO function will be auto start
after 10 senconds. if you want to cancel this DEMO function, press
DEMO/DIMMER button again.
Note
•
The loudspeakers are no longer used to
output the sound.
Connect the headphones
to the
PHONES
jack on
the front panel.
•
Prolonged use of headphones at a high volume may damage your hearing.
Note
Plug a microphone with a 6.3ø MIC
jack into the Mic terminal.
Connecting Headphones/Microphone
•
Connect one Microphone.
•
Turn the
MIC VOL
knob to adjust the
MIC
Volume.
You can connect a set of headphones to your mini component system so that you can listen to
music or radio programmers without disturbing other people in the room. The headphones must
have a 3.5ø jack or an appropriate adapter.
You can also insert microphone to sing along with your favorite Cds.
•
Result: ECO displays and the main set automatically switches itself into
the power saving mode.
ECO Function
You can save the power consumption while the unit is
turned off (on standby)
In Standby mode, press and
hold the
POWER
button for
longer than 3 seconds.
35-58p-MAX-DG53-DG54-NO ENG.indd 52-53
35-58p-MAX-DG53-DG54-NO ENG.indd 52-53
2009-3-24 11:19:03
2009-3-24 11:19:03
