ENG
55
56
Connecting Headphones
/Microphone Function
MISCELLANEOUS
Do not touch the playback side of the disc. Hold
the disc by the edges so that fingerprints will not
get on the surface.
Do not stick paper or tape on the disc.
When you get fingerprints or dirt on the disc, clean it
with a mild detergent diluted in water and wipe with a
soft cloth.
•
When cleaning, wipe gently from the inside to the outside of the disc.
Handling discs
Handling and Storing Discs
Cautions on Handling and
Storing Discs
Small scratches on the disc may reduce sound and picture quality or cause breaks in
playback. Be especially careful not to scratch discs when handling them.
•
Condensation may form if warm air comes into contact with cold parts
inside the player. When condensation forms inside the player, the player
may not operate correctly. If this occurs, remove the disc and let the
player stand for 1 or 2 hours with the power on.
Note
•
The loudspeakers are no longer used to
output the sound.
Connect the headphones
to the PHONES jack on
the front panel.
•
Prolonged use of headphones at a high volume may damage your hearing.
•
HDMI AUDIO is turned OFF when headphones are connected.
•
When CD Ripping, CD audio can’t be out.
Note
Plug a microphone with a 3.5ø MIC jack
into the Mic 1 or 2 terminal.
VOLUME
AUX IN 1
MIC1
MIC2
MIC VOL
ECHO
TUNER
DVD/CD
USB
AUX
•
Connect one or two Microphones.
•
Press the MIC -,+ button to adjust the MIC level.
• Press the ECHO button to select ECHO1,ECHO2, and ECHO OFF.
• MIC output is not available while HDMI AUDIO ON.
