Samsung MagicLAN SWL-2200C, Руководство пользователя

Страница: 53 / 82

53
You can change ESSID. Be careful to insert exact ESSID to connect AP or wireless
client. Upper and lower characters are distinguishable. If you use 'ANY' or 'any', your
system will try to connect to nearby AP or wireless client randomly.
D.2.2. Net Mode(Network Mode)
- Infrastructure : is used to connect to network through AP
- Ad-hoc : is used to connect wireless client in network without AP. You can
connect to ONLY MagicLAN cards in this mode.
- 802.11 Ad-hoc : is used to connect wireless client in network without AP. You can
connect in this mode to wireless LAN cards other than MagicLAN cards that comply
with IEEE 802.11b standard.
D.2.3. Tx Rate
You can choose wireless transmission rate. Default is 'Fully Auto'.
D.3. WEP Tab
You can use WEP option to encrypt transmission data. After setting WEP values,
click 'Write' button, and then PDA needs to power off and on again or to extract the
card and reinsert it. Make sure the WEP keys between AP and wireless client must be
the same to guarantee encrypted transmission.
D.3.1. WEP Mode