English 5
Setting up Your LCD TV/Monitor
Connecting Your LCD TV/Monitor
Figure 2. Cable connections
1. Connecting Computer (
➀
➁
➂
)
A. Connect the power cord to the DC Adaptor and connect the adaptor jack to the DC 12V
power connector on the back of the monitor.
B. Connect the 15-pin D-SUB of the video signal cable to the PC video connector on the
back of the monitor.
C. Connect the stereo audio cable to “Audio (ST)” on the back of the monitor and the other
end to “ Audio Out” terminal of the sound card on your computer.
D. If necessary, please install monitor driver contained on the accompanied CD. For driver
installation, please refer “Installing Video Driver” section on page 7.
2. Connecting External A/V Devices (
➃
➄
)
A. Connect RCA (Yellow) or S-VHS cable to an appropriate external A/V device such as
VCR, DVD or camcorder. (RCA cable and S-VHS cable not included)
B. Connect RCA audio cables to “Audio (R)” and “Audio (L)” terminals and the other ends
to corresponding audio out terminals on the A/V device. (
Stereo-RCA cable
not included)
C. Headphone may be connected to the headphone output on the left-hand side of the
monitor marked (
➅
).
While the headphone is connected, the sound from the
built-in speakers will be disabled.
D. The DTV function is not supported in this model.
3. Connecting TV/CATV (
➆
)
A. Connect an antenna or CATV cable to the antenna terminal on the back of the monitor.
4_LW15E13C-Body3-13p.fm Page 5 Wednesday, August 8, 2001 4:10 PM
