English - 8
Automatic Network Setup
If you connect a LAN cable in a location that supports DHCP, the Internet Protocol (IP) Settings are automatically
configured.
Please check if a LAN cable is connected first.
1.
Press the
MENU
button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the
ENTER
button.
2.
Press the ▲ or ▼ button to select “Network Setup”, then press the
ENTER
button.
3.
Press the
ENTER
button to select “Internet Protocol Setup”.
4.
Press the ▲ or ▼ button to select “Auto Setup”, then press the
ENTER
button.
The Internet Protocol is set automatically.
Select “Network Test” to check the network connectivity.
(Refer to page 86)
Press the
EXIT
button to exit.
➣
➣
➣
Setup
Language
: English
Time
Network Setup
►
V-Chip
Caption
External Settings
Entertainment
: Off
Energy Saving
: Off
PIP
SW Upgrade
Network Setup
Internet Protocol Setup : Auto Setup
Network Test
Enter
Move
Return
Auto Setup
Manual Setup
BN68-01429C-Eng.indb 83
2008-02-26 ¿ÀÈÄ 5:14:38
