background image

IMPORTANT NOTICE

 

The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is 

indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same rating 

must be used.
Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse cover is required, 

it must be of the same colour as the pin face of the plug. Replacement covers are available from your dealer.
If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach 

a power point, you should obtain a suitabl y approved extension lead or consult your dealer for assistance. 

However, if there is no alternative but to cut off the plug, remove the fuse and then safely dispose of the plug.
Do NOT connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible cord.

IMPORTANT

 

The wires in the mains lead are coloured in accordance with the following code: 

BLUE - NEUTRAL BROWN - LIVE 

As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as 

follows : 

The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or 

BLACK. The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured 

BROWN or RED.

WARNING:

 

DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL, WHICH IS MARKED WITH THE 

LETTER E OR BY THE EARTH SYMBOL        , OR COLOURED GREEN OR GREEN AND YELLOW.

Wiring the Mains Power Supply Plug (UK Only)

 

UNITED KINGDOM

 

This Samsung product is warranted for a period of twelve (12) months from the original date of purchase, against  

defective materials and workmanship. In the event that warranty service is required, you should return the 

product to the retailer from whom it was purchased. However, Samsung Authorised Dealers and Authorised 

Service Centres in other EC Countries will comply with the warranty on the terms issued to purchasers in the 

country concerned. In case of difficulty, details of our Authorised Service Centres are available from:

Samsung Electronics U.K. Ltd.

Customer Care Centre

PO box 17

Edinburgh, Eh11 Yb

United Kingdom

Tel: 070 SAMSUNG (7676)(UK & Northern Ireland)

Tel: 01 717 100 (Republic of Ireland Only)

Fax: + (0)70 7117

Web : www.samsung.com/uk

WARRANTY CONDITIONS

 

1.  The warranty is only valid if, when warranty service is required, the warranty card is fully and properly 

  completed and is presented with the original invoice or sales slip or confirmation, and the serial number on  

  the product has not been defaced. 

2.  Samsung’s obligations are limited to the repair or, at its discretion, replacement of the product or the  

  defective part. 

3.  Warranty repairs must be carried out by Authorised Samsung Dealers or Authorised Service Centres.  

  No re-imbursement will be made for repairs carried out by non Samsung Dealers and, any such repair work  

  and damage to the products caused by such repair work will not be covered by this warranty. 

4.  This product is not considered to be defective in materials nor workmanship by reason that it requires  

  adaptation in order to conform to national or local technical or safety standards in force in any Country other  

  than the one for which the product was originally designed and manufactured.

Warranty Card

BN68-01425C-Eng.indd   45

2008-03-03   ¿ÀÈÄ 7:29:40

Содержание LE26A451C1

















































Отзывы: