English-61
Setting Up Your Remote Control
Setting Up the Remote to Operate Your Cable Box.
1
Turn off your cable box.
2
Press the
SELECT
button and make sure that the CABLE LED is
illuminated.
3
Press the
SET
button on your TV’s remote control.
4
Using the number buttons on your remote control, enter three digits
of the cable box code listed on page 63 of this manual for your
brand of cable box. Make sure you enter three digits of the code,
even if the first digit is a “0”.
If there is more than one code listed, try the first one.
5
Press the
POWER
button on the remote control.
Your cable box should turn on if your remote is set up correctly.
If your cable box does not turn on after set-up, repeat steps 2, 3 and 4,
but try one of the other codes listed for your brand of cable box. If no
other codes are listed, try each code, 000 through 074.
Note on Using Remote Control Modes: Cable Box
When your remote control is in “CABLE” mode, the volume
buttons still control your TV’s volume.
04-BN68-00755A-00Eng.qxd 8/24/04 11:41 AM Page 61
Содержание LA22N21B
Страница 67: ...Memo ...
