Section 2
Section 2
Placing And Receiving Calls 57
56 Placing And Receiving Calls
Adjusting The Earpiece Speaker Volume
When you’re on a call, press the volume button up or down until the sound
reaches a comfortable level.
Your Jitterbug has three volume options for your earpiece speaker that you can
adjust
while on a call
as shown below:
• High
• Medium
• Low
Call Waiting
Call Waiting is a feature that allows you to accept a second call if you are already
on a call with another person. The phone does not come with this helpful feature
enabled, but if you would like to turn it on, simply call us at
1-800-733-6632
. A
Call Waiting signal alerts you that there is a second caller waiting. The following
steps outline how to use Call Waiting on your Jitterbug:
1.
When a second person calls your Jitterbug while you are already on a call with
someone else, you will hear an audible beep and a message will appear on the
Inside Display to notify you of a second incoming call.
2.
To answer the second incoming call, press the
button. You will switch to
the second caller and the irst caller will be put on hold and will remain on the
other line.
3.
To switch between the two callers, press the
button. The Inside Display will
indicate the name and number of the person you are connected with.
4.
To end a call at anytime, simply press the
button.
To ignore an incoming call while you are already on a call with someone else,
simply press the
button. The second caller will go directly to your
Voice
(if enabled).