English
_13
●
OVER
VIEW
AT A GLANCE
❖
SNP-3120
Item
Description
Main unit
Main unit includes the lens, switch board, PCB boards and screws.
b
Dome Cover
Dome cover for the lens and unit protection.
c
Audio
Audio I/O port.
Alarm In / Out
terminals
Used to connect alarm in/out terminal block.
Video, RS-485, Power
Used to connect monitor, RS-485 device or power.
ID setup switch
Used to setup the camera ID or communication protocol.
Screw Hole
Used to fix the camera to the wall or ceiling.
Reset Button
Resets the camera settings to the default. Press and hold it for about 5
seconds to turn off the system indicator and restart the system.
J
If you reset the camera, the network settings will be adjusted so that
DHCP can be enabled. If there is no DHCP server in the network, you
must run the IP Installer program to change the basic network settings
such as IP address, Subnet mask, Gateway, etc., before you can
connect to the network.
Network port
Used to connect a PoE or LAN cable.
