Samsung
i
DCS100
System Administration Guide
24
CREATE PROGRAMMED STATION
MESSAGES
[MMC 715]
Programmed messages can be selected by a station user to inform other users of their
current status (e.g. “In a Meeting”). The message displays on the user‘s keyset and
also on any calling keyset which has a display. You can edit existing (default) mes-
sages if necessary, and set up new ones to suit your working environment.
There are 20 possible messages (01–20). Messages 01–10 are pre-programmed as
follows, but can be changed:
01 GIVE ME THE CALL
02 TAKE A MESSAGE
03 ASK THEM TO HOLD
04 SEND TO MY VOICE MAIL
05 TRSF TO MY SECY
06 LEAVE A MESSAGE
07 PAGE ME
08 OUT OF TOWN
09 IN A MEETING
10 I WILL CALL BACK
Messages 11–18 are blank for new messages to be created (up to 16 characters).
Messages 19–20 are pre-programmed as follows, but can be changed:
19 RETURN AT
>>>>>
20 RETURN ON
>>>>>
(Station users can select these messages and insert times or dates as required into the
message—e.g. “RETURN AT 1230”.)
After programming these messages, inform station users what they are.
Open customer programming and follow these instructions.
ACTION
DISPLAY
1. Press
Transfer
(or
TRSF
)
715
Display
shows
2. Dial the message number (e.g.,
11
)
OR press the
VOLUME
keys to make the
selection and press the right soft key to
move the cursor
3. Enter the message using the procedure described
soft key to return to step 2 above
4. Press
Transfer
(or
TRSF
) to store and exit
programming OR press
SPEAKER
to store and
advance to the next program
PGM.MESSAGE (01)
GIVE ME THE CALL
PGM.MESSAGE (11)
_
PGM.MESSAGE (11)
IN THE SHOWROOM