Samsung
i
DCS100
System Administration Guide
12
SET DATE AND TIME DISPLAY
[MMC 505]
Should it ever become necessary to correct the date and time displayed on all of the
keysets, do so as soon as you notice that they are incorrect. Automatic operating mode
will not work correctly and SMDR reports will be of no value if the date and time are not
correct.
The display format is as follows:
W (Day of the week, 0-6): e.g., enter
0
for Sunday and
6
for Saturday.
MM (Month, 01-12): e.g., enter
01
for January and
12
for December.
DD (Day of the month): enter a number in the range
01–31
.
YY (Year): enter the last two digits of the year, e.g. 95.
HH (Hours): use the 24-hour clock and enter a number in the range
00–24.
MM (Minutes): enter a number in the range of 00–59.
Failure to enter the time using the 24-hour clock will cause the date to change at 12:00
P.M. Open customer-level programming and follow these instructions.
Open customer-level programming and follow these instructions.
ACTION
DISPLAY
1. Press
Transfer
(or
TRSF
)
505
Display
shows
2. Enter the new time and date using
the above format
3. Verify the time and date and reenter
them if necessary
4. Press
Transfer
(or
TRSF
)
to store and exit
programming OR press
SPEAKER
to store
and advance to the next program
If you enter invalid data, you will receive an [INVALID ENTRY] message for three sec-
onds. Reenter the correct date and time. If the information you entered is incorrect, re-
peat the procedure.
OLD : 6 0 1 0 1 8 4 : 0 0 4 7
NEW : WMMDDYY : HHMM
OLD : 6 0 1 0 1 8 4 : 0 0 4 7
NEW : 3 0 2 0 9 9 4 : 1 4 4 5
