ENG - 42
Wallmount Components
A TYPE : 450mm
Wall Mount Guide
(AH81-15186A)
x 2
(M4 x L10)
x 2
Holder-Screw
(AH61-04110A)
Screw
(6001-001202)
x 2
Bracket-Wall Mount
(AH61-04235A)
1.
Place the
Wall Mount Guide
against the wall
surface.
•
The
Wall Mount Guide
must be level.
•
If your TV is mounted on the wall, install
the Soundbar at least 2 inches (5 cm)
below the TV.
2 inches (5 cm) or more
2.
Align the
Wall Mount Guide’s
Center Line
with the center of your TV (if you are
mounting the Soundbar below your TV), and
then fix the
Wall Mount Guide
to the wall
using tape.
•
If you are not mounting below a TV, place
the
Center Line
in the center of the
installation area.
Center Line
A TYPE : 450mm
3.
Use a pen to mark the positions of the holes
and remove the
Wall Mount Guide
.
A TYPE : 450mm
4.
Using an appropriately sized drill bit, drill a
hole in the wall at each marking.
•
If the markings do not correspond to the
positions of studs, make sure you insert
appropriate anchors into the holes before
you insert the support screws. If you use
anchors, make sure the holes you drill are
large enough for the anchors you use.
43 / 54
42 / 52
43 / 54
