Samsung HW-Q600C, Руководство пользователя

Страница: 5 / 28

English - 5 English - 4
En
glis
h
NOTES
• It can operate according to the Codec supported by TV.
• This function is supported only when the HDMI Cable or Optical
Cable (not supplied) is connected.
• The message displayed may differ with the TV model.
• This function is available in some Samsung TVs and some
Soundbar models.
05 USING A WIRELESS
CONNECTION
Connecting via Bluetooth
SOUND
MODE
WOOFER
TONE
CONTROL
CH LEVEL
OR
OR
Top of the Soundbar
5 Sec
BT PAIRING
What is the difference between BT READY and BT
PAIRING?
• BT READY : In this mode, you can reconnect TV or mobile device
that was connected before.
• BT PAIRING : In this mode, you can connect a new device to
the Soundbar. (Press the PAIR button on the remote control
or press and hold the (Source) button on the top of the
Soundbar for more than 5 seconds while the Soundbar is in “ BT ”
mode.)
NOTE
• If asked for a PIN code when connecting a Bluetooth device,
enter <0000>.
Bluetooth Multi connection
The Soundbar can be connected to 2 Bluetooth devices at the same
time.
BT
Bluetooth
device A Bluetooth
device B
• Play music from one of the connected Bluetooth devices while
two devices are connected.
06 TROUBLESHOOTING
Before seeking assistance, check the following.
Soundbar does not turn on.
• Check whether the power cord of the Soundbar is correctly inserted
into the outlet.
Subwoofer does not connect automatically.
• Follow the steps below to connect the subwoofer manually.
1. Subwoofer
5 Sec
Blinking
blue fast
; ; ;
Red and Blue is On
2. Remote
Control
SOUNDBAR
연결
음량 우퍼레벨
사운드
모드
SOUNDBAR
연결
음량 우퍼레벨
사운드
모드
5 Sec
First, press the button on the
remote control to turn on the
display, and then press the
Up
button on the remote control
for at least 5 seconds.
3. Soundbar
ID SET
4. Connection
complete
The LINK LED indicator stops blinking and
glows a solid blue (connection complete).
Soundbar works erratically.
• After removing the power cord, insert it again.
• Try again after resetting the product.
• If there is no signal, the Soundbar automatically turns off after a
certain period of time. Turn on the power.
If the remote control does not work.
• Point the remote directly at the Soundbar.
• Replace the batteries with new ones.
Soundbar does not output any sound.
• The volume of the Soundbar is too low or muted. Adjust the volume.
• When any external device (STB, Bluetooth device, mobile device, etc.)
is connected, adjust the volume of the external device.
• For sound output of the TV, select Soundbar.
(Samsung TV: Home (
) → Menu → Settings ( ) → All Settings
( ) → Sound → Sound Output → Select Soundbar)
• Remove the cable from the Soundbar and then reconnect it.
Subwoofer does not output any sound.
• Check whether the LED on the rear of the Subwoofer lights in blue.
Reconnect it when the blue LED blinks or the red LED lights.
If the TV is not connected via HDMI TO TV (eARC/ARC).
• Check whether the HDMI cable is correctly connected to the eARC
terminal.
• Connection may not be possible due to the connected external device
(set-top box, game console, etc.). Directly connect the Soundbar.
• HDMI-CEC may not be activated on the TV. Turn on the CEC on the TV
menu. (Samsung TV: Home (
) → Menu → Settings ( ) →
All Settings ( ) → Connection → External Device Manager →
(HDMI-CEC) ON)
Soundbar does not connect via Bluetooth.
• When connecting a new device, switch to “ BT PAIRING ” for
connection. (Press the PAIR button on the remote control or press
the (Source) button on the body for at least 5 seconds.)
• Reconnect it after removing the Bluetooth speaker list on the device
to connect. (Samsung TV: Home (
) → Menu → Settings ( ) →
All Settings ( ) → Sound → Sound Output → Bluetooth Speaker
List)
Sound drops out when connected via Bluetooth.
• Some devices can cause radio interference if they are located too
close to the Soundbar. e. g. microwaves, wireless routers, etc.
• If your device that is connected via Bluetooth moves too far away
from the Soundbar, it may cause the sound to drop out. Move the
device closer to the Soundbar.
• If a part of your body is in contact with the Bluetooth transceiver
or the product is installed on metal furniture, sound may drop out.
Check the installation environment and conditions for use.
Soundbar does not turn on automatically with the TV.
• When you turn off the Soundbar while watching TV, power
synchronization with the TV is disabled. First turn off the TV.
07 LICENCE
Dolby, Dolby Atmos, and the double-D symbol are registered
trademarks of Dolby Laboratories Licensing Corporation.
Manufactured under license from Dolby Laboratories.
Confidential unpublished works. Copyright © 2012-2021 Dolby
Laboratories. All rights reserved.
For DTS patents, see http://patents.dts.com. Manufactured under
license from DTS, Inc. or DTS Licensing Limited. DTS, DTS:X, and
the DTS:X logo are registered trademarks or trademarks of DTS,
Inc. in the United States and other countries. © 2021 DTS, Inc. ALL
RIGHTS RESERVED.