Samsung HW-MS750, Руководство пользователя

Страница: 22 / 126

ENG - 18 ENG - 19
Installing an additional Soundbar when Samsung wireless speakers are already in use
1. On the Home screen of the Samsung Multiroom app, select Settings ( ) at the top, and then
select “ add Speaker ”.
2. To connect the Soundbar to 2 Samsung wireless speakers and configure a surround sound system,
follow the steps shown below. (You cannot set up a surround sound system using one audio device
and one Soundbar.)
X Touch to go to the list of all speakers.
Y Touch on the right of the Soundbar model name.
Z Touch Surround Setup . Select Done after dragging the speaker to the desired location.
[ The Surround connection is complete.
Soundbar
note
• To connect an additional SWA-9000S (not supplied), disconnect the Samsung wireless speakers
from the Soundbar to disable the surround sound system. (If connecting the surround speakers
without disconnecting SWA-9000S, sound is played via both the Samsung wireless speaker and the
Surround speaker.)
07 USInG tHe reMote ControL
How to Use the remote Control
Surround
VOL BASS
SOUNDBAR
SOUND
MODE
SMART
MODE
Power
Surround
VOL BASS
SOUND
MODE
SMART
MODE
Turns the Soundbar on and off.
Sound Control
Surround
VOL BASS
SOUND
MODE
SMART
MODE
You can select from trebLe , SynC , front
toP , rear LeVeL , or rear SPeaKer on/off .
• To adjust the trebLe or front toP
volume, select Sound Control trebLe or
front toP , and then use the Up/Down
buttons to adjust the volume within the
-6 to +6 range.
• If the video and audio between the TV and
your Soundbar are not synchronised, select
SynC in Sound Control, and then set audio
delay between 0~300 milliseconds by
using the
Up/Down buttons.
• If surround speakers (not supplied) are
connected, select
rear LeVeL and use the
Up/Down buttons to adjust the volume
within the -6 to +6 range.
The
rear SPeaKer function can be turned
on/off by using the Up/Down buttons.
• SynC is only supported in some functions.
Surround
Surround
VOL BASS
SOUND
MODE
SMART
MODE
The Surround Sound function adds depth and a sense of space to sound.
Each time you press this button, ON and OFF alternate.
• ON : Play sound over all the speakers.
• OFF : You can hear the sound of the original source channel from several speakers.