ENG - 25
1.
Place the
Wall Mount Guide
against the wall
surface.
•
The
Wall Mount Guide
must be level.
•
If your TV is mounted on the wall, install
the Soundbar at least 5 cm below the TV.
5 cm or more
2.
Align the Paper Template’s
Centre Line
with
the centre of your TV (if you are mounting
the Soundbar below your TV), and then fix
the
Wall Mount Guide
to the wall using tape.
•
If you are not mounting below a TV, place
the
Centre Line
in the centre of the
installation area.
Centre Line
CENTER LINE
A
B
B
A
A-TYPE : 616mm
B-TYPE : 360mm
3.
Push a pen tip or sharpened pencil tip
through the centre of the
B-TYPE
images on
each end of the Guide to mark the holes for
the supporting screws, and then remove the
Wall Mount Guide
.
CENTER LINE
A
B
B
A
A-TYPE : 616mm
B-TYPE : 360mm
B
CENTER LINE
4.
Using an appropriately sized drill bit, drill a
hole in the wall at each marking.
•
If the markings do not correspond to the
positions of studs, make sure you insert
appropriate anchors or mollies into the
holes before you insert the support
screws. If you use anchors or mollies,
make sure the holes you drill are large
enough for the anchors or mollies you
use.
5.
Push a screw (not supplied) through each
Holder-Screw
, and then screw each screw
firmly into a support screw hole.
