· 10 · English
2.
Align the Wall Mount Guide's
Centre Line
with the
centre of your TV (if you are mounting the
Soundbar below your TV), and then fix the
Wall
Mount Guide
to the wall using tape.
c
If you are not mounting below a TV, place the
Centre Line
in the centre of the installation area.
Centre Line
3.
Push a pen tip or sharpened pencil tip through the
centre of the
B-TYPE
images on each end of the
Guide to mark the holes for the supporting
screws, and then remove the
Wall Mount Guide
.
4.
Using an appropriately sized drill bit, drill a hole in
the wall at each marking.
c
If the markings do not correspond to the
positions of studs, make sure you insert
appropriate anchors or mollies into the holes
before you insert the support screws. If you use
anchors or mollies, make sure the holes you drill
are large enough for the anchors or mollies you
use.
5.
Push a screw (not supplied) through each
Holder-Screw
, and then screw each screw
firmly into a support screw hole.
6.
Use the two
Screws
(M4 x L14) to attach both
Bracket-Wall Mount L
and
R
to the Soundbar's
bottom. For a proper fit, make sure to align the
bumps on the Soundbar to the holes on the
brackets.
•
When assembling, make sure the hanger of
the
Bracket-Wall Mounts
are located behind
the rear of the Soundbar. See the illustration
below.
Rear of Soundbar
Right end of Soundbar
•
The left and right mounts are different shapes.
Make sure to position them correctly.
Wall Mount L
Wall Mount R
