background image

ENG - 25

Sound Control

When pressed, the settings 

TREBLE

BASS

, and 

AUDIO SYNC

 are displayed in sequence.  

The desired settings can be adjusted using the 

Up

/

Down

 buttons.

 

To control the volume of the treble or bass sound, press the 

 

(Sound Control)

 button 

to select 

TREBLE

 or 

BASS

 and then adjust the volume between -6~+6 by using the 

Up/

Down

 buttons.

 

Press and hold the 

 

(Sound Control)

 button for about 5 seconds to adjust the sound 

for each frequency band. 150Hz, 300Hz, 600Hz, 1.2kHz, 2.5kHz, 5kHz, and 10kHz are 

selectable using the 

Left/Right

 buttons and each can be adjusted to a setting between 

-6 to +6 using the 

Up/Down

 buttons. (Make sure the Sound mode is set to “

STANDARD

”.)

 

If the video on the TV and audio from the Soundbar are not synchronized, press the 

Sound Control

 button to select 

AUDIO SYNC

 and then set the audio delay between 

0~300 milliseconds

 by using the 

Up/Down

 buttons. (Not available in “

USB

” or 

BT

”mode.)

 

AUDIO SYNC

 is only supported for some functions.

WOOFER 

(BASS) LEVEL

SO

UN

D

M

OD

E

VOL

W

OOFE

R

SOUNDB

AR

SO

UN

D

M

OD

E

VOL

W

OOFE

R

SOUNDB

AR

Push the button up or down to adjust the level of the woofer (bass) to -12 or between -6 to 
+6. To set the woofer (bass) volume level to 0 (Default), press the button.

VOL 

(Volume)

SO

UN

D

M

OD

E

VOL

W

OOFE

R

SOUNDB

AR

SO

UN

D

M

OD

E

VOL

W

OOFE

R

SOUNDB

AR

Push the button up or down to adjust the volume.

 

Mute

 

Press the 

VOL

 button in to mute the sound. Press it in again to unmute the sound.

Содержание HW-A45C













































Отзывы: