23
- English
Settings
3.
Press the
WPS(PBC)
button on your router
within two minutes. Your product automatically
acquires all the network settings values it
needs and connects to your network after the
network connection is verified.
4.
When it is done, highlight
OK
, and then
press the
OK
button.
✎
For a WPS connection, set your wireless
router’s security encryption to AES. WEP
security encryption does not support a WPS
connection.
Wi-Fi Direct
The
Wi-Fi Direct
function allows you to connect
Wi-Fi Direct
devices to the product and each other
using a peer-to-peer network, without a wireless
router.
✎
Some
Wi-Fi Direct
devices may not support
the AllShare function if connected via
Wi-Fi
Direct
. If this is the case, change the network
connection method you used to connect the
device to the home theater.
✎
Wi-Fi Direct
transmissions can interfere
with Bluetooth signals. Before you use the
Bluetooth function, we strongly recommend
that you turn off the
Wi-Fi Direct
function on
any device in which it is currently on.
1.
Turn on the
Wi-Fi Direct
device and activate
its
Wi-Fi Direct
function.
2.
In the Home screen, select
Settings
, and then
press the
OK
button.
3.
Select
Network
, and then press the
OK
button.
4.
Select
Wi-Fi Direct
, and then press the
OK
button.
The
Wi-Fi Direct
devices that you can connect
the home theater to appear.
Refresh
Wi-Fi Direct
Device Name : [HTS]H7730WM
Select your Wi-Fi Direct device to connect to.
AndroidXXXXXXX
Disconnected
Close
Settings
5.
You have three ways to complete the Wi-Fi
connection:
~
Through the Wi-Fi device.
~
Through the product using PBC.
~
Through the product using a PIN.
Each is covered below.
Through the Wi-Fi Device
1.
On the Wi-Fi device, follow the device's
procedure for connecting to another
Wi-Fi
Direct
device. See the device's user manual
for instructions.
2.
When you have completed the procedure,
you should see a pop-up on your TV screen
saying that a device that supports
Wi-Fi
Direct
has requested to connect. Select
OK
,
and then press the
OK
button to accept.
3.
The Connecting pop-up appears, followed
by the Connected pop-up. When it closes,
you should see the device listed on the
Wi-Fi
Direct
screen as connected.
~
The PBC and PIN procedures connect devices
automatically.
Through the Product Using PBC
1.
Select the
Wi-Fi Direct
device you want to
connect to this product, and then press the
OK
button.
2.
The Connecting pop-up appears, followed
by the Connected pop-up. When it closes,
you should see the device listed on the
Wi-Fi
Direct
screen as connected.
Through the Product Using a PIN
1.
Select the
Wi-Fi Direct
device you want to
connect to this product, and then press the
OK
button.
2.
The PIN pop-up appears.
3.
Note the PIN code in the pop-up, and then
enter it into the appropriate field in the
Wi-Fi
Direct
device you want to connect.
4.
The Connecting pop-up appears, followed
by the Connected pop-up. When it closes,
you should see the device listed on the
Wi-Fi
Direct
screen as connected.
HT-H7730WM_ZA-0325_Eco.indd 23
HT-H7730WM_ZA-0325_Eco.indd 23
2014-03-25 11:49:48
2014-03-25 11:49:48