21
- English
Settings
Network Settings
MAC Address
XX:XX:XX:XX:XX:XX
IP Address
0. 0. 0. 0
Subnet Mask
0. 0. 0. 0
Gateway
0. 0. 0. 0
DNS Server
0. 0. 0. 0
a
Previous
d
Skip
<
Move
"
Select
IP auto setting failed. Try the following to set up the IP automatically, or set up the IP manually
by selecting IP Settings.
- Ensure that the DHCP server is enabled on the wireless network, then unplug and plug the wireless
network in again.
- Contact your internet service provider for more info.
Wired network connection failed.
Change Network
IP Settings
Retry
Close
2.
Use the ◄► buttons to select
IP Settings
,
and then press the
E
button. The
IP Settings
screen appears.
3.
Select the
IP setting
field, and then set it to
Enter manually
.
4.
Select a parameter to enter (
IP Address
, for
example), and then press
E
. Use the number
keypad on your remote control to enter the
numbers for the parameter. You can also enter
numbers using the ▲▼ buttons. Use the ◄►
buttons on the remote control to move from
entry field to entry field within a parameter. When
done with one parameter, press the
E
button.
5.
Press the ▲ or ▼ button to move to another
parameter, and then enter the numbers for that
parameter following the instructions in Step 4.
6.
Repeat Steps 4 and 5 until you have filled in all
parameters.
✎
You can get the network parameter values from
your Internet provider.
7.
When finished entering all the parameter values,
select
Return
(
'
), and then press the
E
button. The home cinema verifies the network
connection and then connects to the network.
Wireless Network
You can set up a wireless network connection in three
ways:
- Wireless Automatic
- Wireless Manual
- WPS(PBC)
Before you configure the wireless network
connection, disconnect any wireless network devices
currently connected to the product or, if applicable,
the product's current wired connection.
Wireless - Automatic
Follow the Steps 1 to 3 in "Configuring Your Network
Connection". (See page 20)
1.
In the
Network Settings
screen, change
Network Type
to
Wireless
. The product
searches for and then displays a list of the
available networks.
㾎
㾎
Network Settings
Select your network type.
Network Type
Wireless
Wireless network
m
Move
"
Select
'
Return
You can connect your BD
Home Theater to the
internet. Please select which
wireless network to use
WPS(PBC)
Search
si-ap
MIC
KIMING_VTOWER
2.
Select the desired network, and then press the
E
button.
3.
On the
Security
screen, enter your network's
security code or pass phrase.
Enter numbers directly using the number buttons
on your remote control. Enter letters by selecting
a letter with ▲▼◄► buttons, and then pressing
E
button.
4.
When finished, select
Done
, and then press the
E
button. The product verifies the network
connection and then connects to the network.
✎
You should be able to find the security code or
pass phrase on one of the set up screens you
used to set up your router or modem.
Wireless - Manual
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the
Network Settings
values manually.
Follow the Steps 1 to 3 in "Configuring Your Network
Connection". (See page 20)
1.
In the
Network Settings
screen, change
Network Type
to
Wireless
. The product
searches for and then displays a list of the
available networks.
2.
Scroll through the list, select the desired network
or
Add Network
, and then press the
E
button.
3.
If you selected a network in Step 2, go to Step 6.
If you selected
Add Network
, go to Step 4.
HT-H5500K_30HK_30K_50HK_50K_50WK-XP-ENG_0307.indd 21
HT-H5500K_30HK_30K_50HK_50K_50WK-XP-ENG_0307.indd 21
2014-03-07 2:39:54
2014-03-07 2:39:54
