English
13
|
03
Connections
Installing the Speakers on the Tallboy Stand
* HT-H4530R only - Front Speakers
* HT-H4550R only - Front/Surround Speakers
1.
Turn the Stand Base upside-down and connect it to the Stand.
2.
Use the driver to combine the screws on the 3 marked holes.
3.
Straighten a supplied speaker wire to the gravity direction and put
in the hole on the centre of Stand Base.
4.
Connect the upper Speaker to the assembled Stand.
5.
Insert a screw clockwise into the hole on the rear of the speaker
using a screwdriver.
And then connect a speaker cable.
6.
This is the appearance after the speaker is installed.
Follow this steps to install other speaker.
Stand Base
Stand
3
4
Speaker
Stand
2
5
6
1
(L)
(R)
(L)
(R)
SURROUND
FRONT
SUBWOOFER
STAND
SPEAKER CABLE
SCREW (5x15): 8EA STAND BASE
CENTRE
HT-H4530R
HT-H4550R
FRONT / SURROUND
(L)
(L)
(R)
(R)
SUBWOOFER
STAND
SPEAKER CABLE
SCREW (5x15): 16EA
STAND BASE
CENTRE
HT-H4500R-XM-1211.indd 13
HT-H4500R-XM-1211.indd 13
2014/1/23 10:07:30
2014/1/23 10:07:30
