|
12
English
Getting Started
Rear Panel
HDMI OUT
HDMI IN
1
2
LAN
POWER
AUX IN
FM ANT
OPTICAL
DIGITAL
AUDIO IN
L
R
SPEAKERS OUT
CENTER
SUBWOOFER
FRONT
L
SURROUND
L
FRONT
R
SURROUND
R
IMPEDANCE : 3
COOLING FAN
SPEAKER OUTPUT
CONNECTORS
HDMI IN
AUX IN
* FM ANTENNA
POWER CORD
HDMI OUT
LAN TERMINAL
EXTERNAL DIGITAL
AUDIO IN (OPTICAL)
SPEAKERS OUT
CENTER
SUBWOOFER
FRONT
L
FRONT
R
IMPEDANCE : 3
* In case of HT-F6530W/F6550W
*
Connecting the FM Antenna
1.
Connect the FM antenna supplied to the FM ANT Jack.
2.
Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or
other rigid surface.
|
NOTES
|
Maintain a minimum of 10 cm of clear space on all sides of the home cinema to ensure adequate ventilation. Do not
obstruct the cooling fan or ventilation holes.
This product does not receive AM broadcasts.
Attaching the Toroidal Ferrite Core to the Power Cord of the Wireless
Receiver Module (SWA-6000)
* In case of HT-F6530W/F6550W
If you attach a Toroidal ferrite core to the power cord of the wireless receiver module, it will help to prevent RF
interference from radio signals.
1.
Pull the fixing tab of the Toroidal ferrite core to open it.
2.
Make a loop twice in the wireless receiver module power cord.
3.
Attach the Toroidal ferrite core to the wireless receiver module power
cord as the figure shows and press it until it clicks.
• Insert the ferrite core as close to the Wireless Receiver Module as
possible.
HT-F6500_30W_50W-XU_0207.indd 12
HT-F6500_30W_50W-XU_0207.indd 12
2013-02-07 오후 7:35:49
2013-02-07 오후 7:35:49