English
15
|
03
Connections
Installing the Speakers on the Tallboy Stand
1.
Turn the Stand Base upside-down and connect it
to the Stand.
2.
Use the driver to combine the screws on the 3
marked holes.
3.
Straighten a supplied speaker wire to the gravity
direction and put in the hole on the centre of Stand
Base.
4.
Connect the upper Speaker to the assembled
Stand.
5.
Insert a screw clockwise into the hole on the rear of
the speaker using a screwdriver.
And then connect a speaker cable.
6.
This is the appearance after the speaker is installed.
Follow this steps to install other speaker.
Connecting The Speakers
1.
Match each speaker cable bundle to the correct speaker by matching the colour coded
plug on each bundle to the coloured sticker on the bottom of each speaker.
2.
To attach speaker wire to each speaker:
a.
Press down the red tab on the back of the speaker, insert the red wire, and then
release the tab.
b.
Press down the black tab on the back of the speaker, insert the black wire, and then
release the tab.
3.
Connect the speaker wire plugs from each speaker to the back of the product by
matching the colours of the speaker plugs to the colours of the speaker jacks.
4.
Connect the left and right surround speakers to the wireless receiver module.
Again, match the colour of the plugs to the jacks on the wireless receiver module.
5.
Plug the power cord of the wireless receiver module into a wall outlet.
6.
Turn on the product. The product and wireless receiver module will now communicate with each other and you will
hear sound from the Surround speakers.
2
4
1
3
Stand Base
Stand
Speaker
Stand
5
6
Black
Red
HT-F5550W-XY_0529.indd 15
HT-F5550W-XY_0529.indd 15
2013-05-29 오후 4:50:31
2013-05-29 오후 4:50:31
