Connecting the Video Out to TV
13
METHOD 2
Scart ...............
Better Quality
If you television is equipped with an SCART input, connect an Scart Jack (not supplied)
from the AV OUT jack on the back panel of the system to the SCART IN jack on your televi-
sion.
METHOD 1
Composite Video ...............
Good Quality
Connect the supplied video cable from the VIDEO OUT jack on the back panel of the sys-
tem to the VIDEO IN jack on your television.
METHOD 3
Component (Progressive Scan) Video ...............
Best Quality
If your television is equipped with Component Video inputs, connect a component video
cable (not supplied) from the Pr, Pb and Y jacks on the back panel of the system to the cor-
responding jacks on your television.
SCART
IN
VIDEO
IN
COMPONENT
IN
TV
•
When the Progressive scan mode is selected, the VIDEO and SCART outputs
do not feed any signal. See page 14 to select Progressive Scan.
Note
For using the SCART cable
• If Scart is equipped for your TV, set RGB-COMPOSITE selector
of the center unit to RGB. You can get a better picture quality by
using Scart setting.
• If Scart (RGB Input) is not equipped for your TV,
set RGB-COMPOSITE selector to COMPOSITE.
COMPOSITE
RGB
COMPOSITE
RGB
Make sure that turn off and disconnect the plug from outlet before moving or installing the product.
In connecting to video, select one of following three methods that suits for TV and connect it.
METHOD 1
METHOD 3
METHOD 2
1p~40p(DS760T)-GB 2004.5.15 11:25 AM Page 16