background image

Connecting Cable TV and VCR

When you use a converter box

with your TV, there may be 

features that you can not 

program using the remote 

control, such as programming

your favorite channels and

blocking channels.

The output from “Cable Out” is

not available when “Air/CATV”

is set to “Cable” in the PIP

menu.

1

Plug the incoming cable into the “Cable IN” terminal

on the rear panel.

You can connect different cable systems to your TV, including cable without a cable box, and

cable with a cable box that descrambles some or all channels.

Cable without a Cable Box

If you want to connect cable, and you do not need to use a cable box:

Connecting an Analog Cable Converter Box

This connection allows you to watch cable and premium channels. You should keep your 

TV selected to “Cable IN” so that you can use the TV features. When viewing premium

channels, select “Air IN” and tune the TV to channel 3 or 4 (whichever channel is vacant in

your area), then use the converter box to change channels. You will need two coaxial

cables.

1

Find the cable that is connected to the ANTENNA

OUT terminal on your cable box. This terminal might

be labeled “ANT OUT”, “VHF OUT” or simply,

“OUT”.

2

Connect the other end of this cable to the “Cable IN”

terminal on the rear panel.

Cable with a Cable Box that Descrambles All Channels

From
Cable

English-3

BP68-00461A-00Eng_1206  12/6/04  12:38 PM  Page 3

Содержание HLR4677W - 46" Rear Projection TV

















Отзывы: