Samsung HLN507W1X/XAA, Руководство по обслуживанию

Страница: 31 / 90

Alignment and Adjustments
Samsung Electronics 1-29
2. When changing Engine
1) Factory item
:
1. DDP1010 Delay
POS - Y
1
5
The position of picture may be shifted depending on the state of engine.
POS - X
260
DELAY
223
When changing a color wheel attached on the engine, color may change due to the deviation of where color wheel sensor is assembled.
2. R,G Gain and R,B Offset of Dnle items is needed to adjust if the screen has a problem. 8. Option items
lamp life
0
When changing lamp, set the value to "0".
lamp clear
Make the data clear and then lamp life "0" hour.
3. When changing Color Wheel
1. Do adjustment for Delay of DDP1010 if it has a difference in Red.
Delay
223
When color wheel is changed the same case as engine, color may change due to the deviation of where color wheel is assembled.
4. When changing Lamp, clear the lamp life on 8. Option item. For defective lamp, write in a defect form with the time used.
lamp life
0
When changing lamp, set the value to "0".
lamp clear
Make the data clear and then lamp life "0" hour.
Item
Initial value
Description
Item
Initial value
Description
Item
Initial value
Description
Item
Initial value
Description
CHECKPOINTS AND MEASURES TO TAKE WHEN CHANGING DLP ASSY (2/2)