3 Disassembly and Reassembly
3-2
GY15MS*/GY17MS*
6. Remove 5 screws from the main board and lift
up main board.
7. Remove cover front from the panel and
remove 4 screws from the shield panel.
8. Lift up shield from the panel.
1. Place monitor face down on cushioned table.
Remove 2 screws from grip on the stand and
remove signal cable.
CAUTION : Always securely hold the stand
to remove a screw. Failure to do so may cause
the stand to topple or fall onto your feet.
2. Remove 2 screws from the rear cover. Insert
the opening jig into the grooves at each side
and press until it clicks.
3. Open the rear cover and remove 2 screws
from the shield.
3-1-2 GY17MS*
Содержание GY15MS series
