SAMSUNG Proprietary-Contents may change without notice
Exploded View and Parts List
11-2
This Document can not be used without Samsung's authorization
①
②
1) Be careful not to occur damages to the SLIDE FPCB.
2) Be careful not to occur any damages to parts of the
FRONT and the FPCB during disassembly.
1) Be careful not to occur any damages and scratches.
2) Be careful not to occur any damages to parts of
the Lower and the FPCB during disassembly.
1) Remove with rounded tweezers.
2) Be careful not to occur any damages and scratches
to FPCB (It could be torn.)
1) Remove with rounded tweezers.
2) Be careful not to occur any damages and scratches
to the FPCB.
5
6
7
8
1) Take apart the Slide FPCB to the
Front.(Double Sided tape)
2) Unscrew 8 screw points.
1) Remove the screw caps, ① ~ ②
2) Unscrew 8 screw points.
3) Take apart the Lower
1) Remove the friction tape which holds the LCD
FPCB.
2) Open the FPCB actuator.
3) Remove the Main Slide FPCB carefully.
(Notice that there is a double sided friction tape
at the bottom.
1) Remove the NUM KEY FPCB actuator.
2) Disassemble the whole after removing the
motor by tweezers
①
③
①
②
②
①
②
