Call Functions and Contacts List 57
4.
To return to the multi-party call, tap the
Merge
icon. All
of the multi-party call participants can now hear each
other.
Dropping One Participant
1.
Press
and then tap
Manage conference call
➔
to the right of the number to drop.
The participant is disconnected and you can continue
the call with the other participant.
2.
Tap
to end your conversation with the remaining
caller.
Call Waiting
You can answer an incoming call while you have a call in
progress, if this service is supported by the network and you
have previously set the Call waiting option to
Activate
.
You are notified of an incoming call by a call waiting tone. For
more information, refer to
“Configuring Additional Voice Call
Settings”
on page 247.
To answer a new call while you have a call in progress:
1.
In a single motion, touch
and slide it in any
direction to answer the new incoming call.
2.
Tap an option from the Accept call after menu:
• Putting xxx on hold
to place the previous caller on hold while
you answer the new incoming call.
• Ending call with xxx
to end the previous call and answer the
new call.
Note:
The new caller appears at the top of the list. The
previous caller is placed on hold and appears at the
bottom of the list.
3.
Tap
Swap
to switch between the two calls. This places
the new caller on hold and activates the previous call.
Important!
The currently active call is displayed with a green
background.
4.
Tap
Swap
again to switch back.
End
