6
Samsung Warranty Registration 7 Year
Pre-plumbed / Separate Cylinder
Heating Mode Commissioning Data
. It is useful to take these measurements at commissioning and testing. They
are for your own records, they are not needed to register the unit for warranty.
What type of system do you have?
Is there a Header, Buffer or Heat Exchanger installed?
You need to measure the following and record the data:
Flow temperature at Heat Pump
Measure with pipe thermometer
Return temperature at Heat Pump
Flow temp into header / plate
Return from header / plate
Flow temp out of header /
plate to heating
Return from Heating into
header / plate
Flow rate from flow meter
Air temp at the back of the unit
Ambient air temperature
Measure from the garden
Hot water cylinder model No.
Cylinder water temp at start-up
Measure from the remote controller
Cylinder water temp after 30mins
Measure from the remote controller
Water flow temp at cylinder
Measure with pipe thermometer
Water return temp at cylinder
Measure with pipe thermometer
Flow Rate
Measure from the flow meter
Hot Water Mode Commissioning Data
You must be running the heat pump in hot water mode for this section
Pump Z1
Header,
Buffer or
Heat
Exchanger
Pump HP
H
HW
Flow and Return
at Heat Pump
Flow Rate
Return from
Header
Flow out of
Header
Flow into
Header
Return from
Heating
Water temp in weather comp mode
Ambient temperature °C
Fl
ow t
emper
atur
e °C
-5
35
55
50
45
40
0
5
10
15
Installation Manual.indd 6
31/
10
/2018 19:01:12
