Troubleshooting
English
73
Code
Action
Upper
washer
Lower
washer
1 LC
LC
Check for water leaks.
• Power the washer off, and then check the drain system for
any leaks. Once the leak issue is resolved, power the washer
on after 2-3 minutes.
• Depending on the model, the drain system drains water
automatically. The
POWER
and
START/PAUSE
buttons may
be disabled during this process.
1 LC1
LC1
Check the drain hose.
• Make sure the end of the drain hose is placed on the floor.
• Make sure the drain hose is not clogged.
• If the information code remains, contact a customer service
centre.
Others
• Use caution not to overfill any of the compartments (main
wash/fabric softener).
• Do not spray or use water when cleaning the top door of the
upper washer. Use a cloth to wipe up.
1 4C
4C
Check the water supply line.
• Check the connection to the water line (including water
taps).
• Power off and then power the washer on after 2-3 minutes,
and then try again.
• Depending on the model, the drain system drains water
automatically. The
POWER
and
START/PAUSE
buttons may
be disabled during this process.
1 4C2
4C2
The water being supplied is too hot.
• Make sure the cold and hot water taps are properly
connected.
• Power off and then power the washer on after 2-3 minutes,
and then try again.
FlexWash_DC68-03768L-00_EN.indd 73
2017-09-13 2:26:21