Installation
English
27
The pipe connector can be positioned in the following ways:
A
B
Over the edge of a wash basin
The
pipe connector (B)
must be placed at a
height of between 60 cm and 90 cm from
the floor. To keep the spout of the drain
hose bent, use the supplied plastic
hose
guide (A)
. Secure the guide to the wall
using a hook to ensure stable drainage.
NOTE
B : Pipe Connector
A
F
D
G
E
B
C
ln a standpipe or laundry tub
The
laundry tub (B)
or
standpipe (C)
must
be no shorter than 46 cm and no higher
or longer than 245 cm
.
Make sure the
pipe connector and the standpipe are
not airtight. The
height of the standpipe
(E)
must be 1100 mm or higher from the
floor.
NOTE
A
:
Hose guide
/
D
:
Tie straps / F : Pipe
Connector / G: 85 mm
CAUTION
• Do not extend the (Y-shaped) pipe
connector using an extension hose.
• Make sure you face the tip of the pipe
connector downwards to the drain hole.
Positioning the connector tip elsewhere
can cause the drained water to flow
backward.
FlexWash_DC68-03768L-00_EN.indd 27
2017-09-13 2:26:12