English
27
Installation
STEP 10
Securing
1.
Check the parts on the sink to which the drain hose will be connected.
2.
There are several ways to insert the drain hose into the drain hose connector of the
sink, as shown in the following figures. You must connect the drain hose in accordance
with the water pipe installation regulations in your region.
Figure 8
Case 1.
Without disposal
Air gap
Hose clamp
Drain
hose
Hose clamp
Without disposal
With an air gap/without disposal
Without an air gap
Case 2.
With disposal
Air gap
Hose clamp
Drain
hose
Hose clamp
With disposal
Disposal with an air gap
Without an air gap
3.
Check the size of the sink’s drain hose connector. If needed, cut the drain hose so its
end fits onto the sink connector (⅝ in. or 1 in. - as shown in
Figure 9
below). If the end
of the drain hose does not fit onto the drain hose connector of the sink, use an adaptor
purchasable at a plumbing/hardware supply store.
DW9900R_DD68-00208B-00_EN.indd 27
12/29/2018 1:57:45 PM
