English - 23
Top nozzle
1.
Check whether the nozzle holes are
clogged by food particles.
2.
If cleaning is needed, remove the nozzle.
3.
To remove the nozzle, pull out the upper
rack fi rst, unfasten the nozzle cap by turning
it counterclockwise, and then remove the
upper nozzle.
4.
Clean the nozzle, re-insert it, and then
fasten the nozzle cap to the nozzle by
turning the cap clockwise.
5.
Check whether the nozzle is engaged
correctly by rotating it by hand.
CLEANING THE FILTER
1.
Remove the lower rack fi rst.
2.
Rotate the fi lter handle counterclockwise to unfasten the fi lter
compartment door.
3.
Remove the fi lter door, and then the
fl at micro fi lter underneath.
4.
Remove any dirt or other remains
from the micro fi lter and the fi lter door,
and then rinse them under running
water.
5.
Re-install the fl at micro fi lter, and then the fi lter door.
6.
Rotate the fi lter door handle clockwise to lock the fi lter door.
Once a month, clean the fi lter for better washing performance.
If the fi lter door does not close properly, cleaning performance will be decreased.
STORING YOUR DISHWASHER
If you need to store your dishwasher for an extended period of time, fi rst drain and disconnect it. If you
leave water in the hoses and internal components, you can damage the dishwasher.
After draining and disconnecting the dishwasher, be sure to turn off the water supply valve and circuit
breaker.
CAUTION
04 cleaning and maintaining
1
2
Cap
nozzle
Filter with handle
Flat micro fi lter
DW80H9950-00149A-01_EN.indd Sec5:23
DW80H9950-00149A-01_EN.indd Sec5:23
2014-03-11
5:27:04
2014-03-11
5:27:04