36_
Setting up your dishwasher
CONNECTION OF DRAIN HOSES
Insert the drain hose into a drain pipe with a minimum diameter of 4 cm, or let it run into the sink, making
sure to avoid bending or crimping it. The top of the hose must be at a height between 30 and 80 cm. The
free end of the hose must not be immersed in water to avoid the back flow of it.
NOTE
The top of the hose must
be at a height between
30 and 80 cm.
The free end of the hose
must not be immersed in
water.
Drain pipe
40 mm
Counter
Min. 300 mm
Max 800 mm
POSITION THE APPLIANCE
Position the appliance in the desired location. The back should rest against the wall behind it, and the sides,
along the adjacent cabinets or walls. The dishwasher is equipped with water supply and drain hoses that
can be positioned either to the right or the left sides to facilitate proper installation.
Levelling the Appliance
Once the appliance is positioned for levelling, the height of the
dishwasher may be altered via adjustment of the screwing level of the
feet. In any case, the appliance should not be inclined more than 2°.
START OF DISHWASHER
The following should be checked before starting the dishwasher.
1.
the dishwasher is level and fi xed
2.
the inlet valve is opened
3.
There is no leakage at the connections of the conducts
4.
the wires are tightly connected
5.
the power is switched on
6.
the inlet and drain hoses are not knotted
7.
All packaging materials and printings have been taken out of the dishwasher
ATTENTION
: After installation please put this manual in a safe place. The contents of this manual can
be useful to users.
Setting up your dishwasher
DW5500MM_DD81-02615C-10_EN.indd 36
DW5500MM_DD81-02615C-10_EN.indd 36
2022-12-19 오후 1:50:50
2022-12-19 오후 1:50:50