20_
Using the detergent and water softener
ADJUSTING THE AMOUNT OF RINSE AID
You can change the amount of rinse aid applied during a cycle.
The buttons used to enter the setting mode may vary depending on the model.
Check the buttons for your model.
• DW60M5050BB
:
A
(
Express
)
• DW60M5062F* / DW60M5052F* / DW60M5042F* / DW60M5044F* :
A
(
Program
)
1.
Press and hold the
A
button for fi ve seconds.
2.
Press the
Delay start
button to enter the Rinse aid setting mode.
-
The display shows the current setting.
3.
Press the
A
button to select the amount of rinse aid you want.
-
You can select from d1-d5 (minimum-maximum)
4.
Wait 5 seconds to save the setting.
HOW TO USE THE MULTI TAB OPTION
Your dishwasher has a
Multi tab
option which allows the replacement of salt and rinse aid with a Multi
detergent tablets. This option can select on Intensive, Eco program only.
The Multi tab setting is only for use with Multi detergent tablets. If using Multi detergent tablet without
this option, the appliance will not get its best performance.
1.
Put the Multi detergent tablet into the container then start the
Multi tab option.
2.
Close the lid and press until it locks in place.
When using Multi detergent tablet ensure that the lid can be
closed correctly.
ATTENTION
: Keep all detergents in a safe place out of
children’s reach. Always add the detergent in the dispenser just
before starting the dishwasher.
Using the detergent and water
softener
DW5500MM_DD81-02615C-10_EN.indd 20
DW5500MM_DD81-02615C-10_EN.indd 20
2022-12-19 오후 1:50:35
2022-12-19 오후 1:50:35