12_
Installing your dishwasher
STEP 2. CHECKING WATER SUPPLY AND ELECTRICAL
REQUIREMENTS
• The water supply line pressure must be between 0.05-0.8 MPa.
• Supply cold water only. Make sure that the water temperature does not exceed 60 ˚C.
• Do not supply hot water. Otherwise, the product may malfunction.
• Use a rated power of 220-240 V~, 50 Hz.
• Install the product while the power cord is unplugged.
• Use a power outlet with a maximum allowable current of 16 A. (The maximum current for this dish
washer is 11 A.)
• When powering the dishwasher, ensure that your power supply has:
-
An 220-240 V~, 50 Hz fuse or circuit breaker.
-
An individual branch circuit serving your dishwasher.
• After the installation, check if the power cord is not bent or damaged.
• Ensure that the water supply valve is turned off before connecting the water supply line to the
dishwasher.
• Seal the water supply line connections using tefl on tape or sealing compound to stop any water
leakage.
CAUTION
WARNING
Installing your dishwasher
FBI-Install_DD68-00167B-05_EN.indd 12
FBI-Install_DD68-00167B-05_EN.indd 12
2017-02-08 1:43:42
2017-02-08 1:43:42