12_
Installing your dishwasher
STEP 2. CHECKING WATER SUPPLY AND ELECTRICAL
REQUIREMENTS
•
The water supply line pressure must be between 0.05 ~ 0.8 MPa.
•
Supply cold water only. Make sure that the water temperature does not exceed 60 ˚C.
•
Use a rated power of 220 ~ 240 V/50 Hz.
•
Install the product while the power cord is unplugged.
•
Use a power outlet with a maximum allowable current of 16 A. (The maximum current for this dish
washer is 11 A.)
•
When powering the dishwasher, ensure that your power supply has:
- An AC 220-240 V / 50 Hz fuse or circuit breaker.
- An individual branch circuit serving your dishwasher.
•
After the installation, check if the power cord is not bent or damaged.
•
Do not supply hot water. Otherwise, the product may malfunction.
•
Ensure that the water supply valve is turned off before connecting the water supply line to the
dishwasher.
•
Seal the water supply line connections using teflon tape or sealing compound to stop any water
leakage.
CAUTION
WARNING
Installing your dishwasher
DD68-00132A-02_S04_140602_EN.indd 12
2/6/2014 18:36:44
