Installing your dishwasher
_13
03 INS
TALLING
STEP 3. PREPARING THE CUSTOM PANEL
4
1
4
1
Ø 2
Ø 2
~12
~12
1.
Place the supplied installation manual at the back of the custom panel (to be attached to the door of the
product) to be installed and temporarily fix it using transparent tape.
•
The top part of the supplied installation manual and the top part of the custom panel must be
aligned.
•
Use a custom panel between 3~9 kg.
2.
Pre-drill the 6 points marked on the installation manual with a 2-pi drill bit to a depth of 10~12mm.
3.
Remove the installation manual and assemble the supplied part
1
by fastening the 2 screws
4
to the
top part as shown above.
CAUTION
DD68-00132A-02_S04_140602_EN.indd 13
2/6/2014 18:36:44