English - 17
C
onnec
ting & S
etting Up
Connecting & Setting Up
Connecting DVD Recorder & VCR to the
TV using the RF Cable
Make sure that both the television and the DVD
Recorder & VCR are switched off before
connecting the cables.
Remove the aerial or network input cable from the
television.
Connect this cable to the 75Ω aerial jack marked
on the rear of your DVD Recorder & VCR.
Plug the RF Cable supplied into the jack on your
DVD Recorder & VCR.
Plug the other end of the RF Cable into the connector
previously used for the aerial on the television.
The RF cable connection of this product sends only
signal of TV. You must connect SCART cable or
Audio/Video cables to watch a DVD and video tape
from DVD Recorder & VCR.
M
1.
2.
3.
4.
M
Connecting the SCART Cable
Case 1 : Connecting DVD Recorder & VCR
to the TV using a SCART Cable
You can connect your DVD Recorder & VCR to the
television using a SCART cable if the appropriate
input is available on the television. You thus:
Obtain better quality sound and pictures
Simplify the setting up procedure of your DVD
Recorder & VCR
Regardless of the type of connection chosen, you
must always connect the RF Cable. Otherwise, no
picture will be visible on the screen when the DVD
Recorder & VCR is switched off .
Make sure that both the television and the DVD
Recorder & VCR are switched off before connecting
the cables.
Connect the Aerial Cable.
Connect one end of a SCART cable (not supplied) to
the AV1 (TV) jack on the rear of the DVD Recorder &
VCR.
Plug the other end into the appropriate connector on
the television.
•
•
M
1.
2.
3.
To RF IN
To RF OUT
RF Cable
To ANT INPUT
TV
ANT
SCART Cable
RF Cable
ANT
TV
Aerial
00000X-VR475-XEU-1~21.indd 17
00000X-VR475-XEU-1~21.indd 17
6/12/08 2:08:48 PM
6/12/08 2:08:48 PM