English
_
r
ECO
r
D
ing
To pause recording
Press the
rEC PaUSE
button to pause a recording in progress.
Press the
rEC PaUSE
button again during pause to resume recording.
You can switch channels by pressing the
PrOg
( ) buttons while recording pauses.
If you select DV mode during rec pause, recording will be stopped.
If you change the input source during rec pause in DV mode , recording will be stopped.
To stop recording
Press the
STOP
( ) button to stop or finish a recording in progress.
When using DVD-RAM/±RW/±R discs, the message “Updating the information of disc. Please wait for a
moment” is displayed.
You can not change the recording mode while recording.
Recording will stop automatically if there is no free space left for recording.
Up to 99 titles can be recorded onto a DVD-RAM/-RW/-R disc, and up to 48 titles onto a DVD+RW/+R disc.
Up to 999 titles can be registered on the HDD.
HDD recording is available for up to 24 hours, and when recording for 24 hours, 3 titles will be recorded with each
being 8 hours in length.
Recording will stop automatically if a copy protected image is selected.
DVD-RAM/±RW discs must be formatted before starting to record. Most new discs are sold unformatted.
Do not use DVD-R authoring discs with this unit.
COPYing FrOM a CaMCOrDEr
SXCVKL
You may control the Camcorder using the IEEE1394 (DV) interface.
Connect the DV output jack of your camcorder to the DV input jack
on the front of your HDD & DVD RECORDER using a DV cable.
Press the
HDD
or
DVD
button.
If you select DVD, press the
OPEn/CLOSE
button and place a
recordable disc on the disc tray. Press the
OPEn/CLOSE
button to
close the disc tray. Wait until
LOaD
disappears from the front panel
display.
Press the
rEC MODE
button repeatedly to select the recording
speed(quality).
Press the
inPUT SEL.
button to select
DV
.
If the input is set to DV, a playback/record menu that enables
camcorder control appears on the top of the screen.
Select the Play (▶) icon on the upper part of the screen to playback
the camcorder and find the starting position to copy.
To start recording, use the ◀▶ buttons to select Record (
●
) icon
in the top side of the screen, then press the
OK
button.
You can press the
rEC
button of the remote control to start recording.
~
~
~
~
~
M
`
`
`
`
`
`
`
`
1.
.
.
.
.
.
Record Mode
SP(35:12)
DV
<
MOVE
r
RETURN
The DV device is connected