22 -
English
C
onnecting & Setting Up
There are several ways to output audio signal not
using scart cables. Select the audio connection that
best suits you below.
•
Case 1 :
Connecting to your TV
•
Case 2 :
Connecting to a stereo amplifier with AV
output jacks
•
Case 3 :
Connecting to an AV amplifier with a
digital output jack
Case 1 : Connecting to your TV
If your TV has audio input jacks, use this connection.
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D symbol
are trademarks of Dolby Laboratories.
“DTS” and “DTS Digital Out” are trademarks of
Digital Theater Systems, Inc.
yellow
white
red
yellow
white
red
Other type of connecting
the Audio output cable
Case 3 : Component Video output
jacks
1. Connect Component video cables(not supplied)
between the COMPONENT OUT(Y,P
B
,P
R
) jacks on
HDD & DVD RECORDER and COMPONENT
IN(Y,P
B
,P
R
) jacks on your TV.
• You will enjoy high quality and accurate colour
reproduction images.
2. Connect audio cables (white and red) between the
AUDIO OUT jacks on the HDD & DVD
RECORDER and AUDIO IN jacks on TV (or AV
amplifier).
(See pages 22~23).
3. After connecting, refer to the pages 41~43.
green
blue
red
green
blue
red
■
Make sure that the colour coded
connections match. The Y, P
B
, P
R
component output jacks of your HDD &
DVD RECORDER must be connected to
the exact corresponding component input
jacks on your TV.
■
Progressive setting is only available when
the Video Out is set to Component. (See
pages 41~43)
NOTE
2-00903E-EURO_18-24 2005.9.24 3:27 PM Page 22