20
_ Installing your dryer
Installing your dryer
CONNECTING THE INLET HOSE
Method 1
The dryer must be connected to the cold water faucet using the new inlet hoses. Do not use old
hoses.
1.
If space permits, attach the brass female end of the “Y”
connector to the cold water faucet.
2.
Turn the cold water faucet off .
3.
Attach the straight end of long hose to the “Y’ connector.
4.
Using pliers, tighten the coupling with an additional two-
thirds turn.
Do not overtighten, as this may damage the coupling.
5.
Attach the angled end of long hoses to fi ll the valve at the
bottom of the dryer’s rear frame. Screw on the coupling by
hand until it is seated on the fi ll valve connector.
6.
Using the pliers, tighten the coupling with an additional two-
thirds turn.
Do not overtighten, as this may damage the coupling.
7.
Check that the water faucets are on.
8.
Check for leaks around the “Y” connector, faucets and
hoses.
Duct Exhaust
Frame
(back)
Water Hose
Y-Connector
Water Hose
DV457E1_02836J-04_EN.indd 20
DV457E1_02836J-04_EN.indd 20
2013-08-08
4:25:37
2013-08-08
4:25:37
Содержание DV457E1GSGR/A1
Страница 70: ...Memo DV457E1_02836J 04_EN indd 70 DV457E1_02836J 04_EN indd 70 2013 08 08 4 25 50 2013 08 08 4 25 50 ...
Страница 71: ...Memo DV457E1_02836J 04_EN indd 71 DV457E1_02836J 04_EN indd 71 2013 08 08 4 25 50 2013 08 08 4 25 50 ...
Страница 143: ...Mémo DV457E1_02836J 04_CFR indd 71 DV457E1_02836J 04_CFR indd 71 2013 08 08 4 26 51 2013 08 08 4 26 51 ...
Страница 215: ...Memo DV457E1_02836J 04_MES indd 71 DV457E1_02836J 04_MES indd 71 2013 08 08 4 24 49 2013 08 08 4 24 49 ...