background image

OPERA

TION

Cleaning Functions

Cleaning Functions

Operation

Cleaning Methods 

•  Auto Clean: Cleans automatically until the Jet Bot completes cleaning 

all rooms one time.

•  Room Clean: You can select a room you want to clean.
•  Spot Clean: You can set a specific area you want to clean.

Cleaning Mode

•  You can select one out of three modes.

You can set the Cleaning Mode only when the Jet Bot is in Room 
Clean.

Suction Power

•  You can select the suction power from Max, Smart or Normal. 

When the Jet Bot is in ‘Smart’ suction power, the Intelligent Power 
Control Clean work.

Repeat Clean

•  The Jet Bot cleans repeatedly until its battery is discharged.

After the Jet Bot completes cleaning one time and returns to the 
Clean Station due to battery shortage, it does not clean again after 
charging is complete.

Empty Dust 

•  You can select the Empty Dust conditions at the SmartThings App.
•  When the Jet Bot returns to the Clean Station, it automatically 

empties its Dustbin. (However, after the Spot Clean, the Jet Bot does 
not empty its Dustbin automatically.)

If the Empty Dust function does not work, check whether the top 
cover of the Clean Station is open or the Dust Bag is full.

While the Jet Bot is docked onto the Clean Station, press the [   ] to 
start emptying its Dustbin.

Intelligent Power 

Control Clean

When the Jet Bot detects a carpet during cleaning, it increases its 
suction power. (Suction Power: ‘Smart’ only)

You can set the Cleaning Functions, the Repeat Clean or the Cleaning Mode at the SmartThings 
App.

When the Jet Bot does not have a saved map, it studies cleaning space through Auto Clean 
function which starts from the Clean Station. After studying the cleaning space, a map is 
saved. (The map creation is enabled through the SmartThings App only.)

You can edit or delete the map at the SmartThings App.

Room Clean or Spot Clean works regardless of choice sequences of the areas. 

If the Jet Bot is surrounded by low height obstacles, it may take more than 2 minutes to find 
its way out of them.

 

English 19

VR8500_EN_00858K-00_EU.indd   19

2021-12-01   오전 10:32:40

Содержание DJ68-00858K
















































Отзывы: