DCS-VIP Internet Keyphone
Quick Guide
— 4 —
22
Installing Your DCS
Installing Your DCS--VIP
VIP
Refer to the following network connection diagram, and then connect each cable to the appro-
priate port on the rear panel of the DCS-VIP as described.
¶
Grounding the VIP Router
The DCS-VIP base unit is provided with a third-wire AC ground through the power cord, which is
adequate for most applications. However, if it is suspected that there is a problem with the
ground provided at the AC outlet, or local codes require a solid earth ground to be connected to
the router, the existing third -wire ground must be disconnected and a new ground connected to
the grounding lug on the rear of the unit (see illustration below). Contact your dealer or Techni-
cal Support for advice and read the ‘Warning’ notice b elow.
Failure to provide an adequate ground may cause unpredictable operation or even cir-
cuit failure.
Warning
Unplug the power cord from the AC outlet before attempting to connect a new ground.
Hazardous voltage may cause death or injury. Observe extreme caution when working with
AC power.
Power
PC
Internet Service Provider
Internet
ISDN connection box
Analogue Phone
Digital Phone
PC
DCS-VIP router
Ethernet hub
Power
